NO SWEAT
NO SWEAT provides a durable waterproof, white plastic coating (modified acrylic) filled with millions of tiny air cells that shut out warm, moist air, preventing condensation from forming.
One 18 ounce can of No Sweat will cover approximately 10 feet of 1-inch pipe with two coats, or 8 square feet of flat surface with two coats.
Features and Benefits
- Durable
- Flexible
- Water-Resistant
- Paint-able
Part Number; Size
- NS-1 18 oz 12/cs
Directions:
- Remove dust and loose dirt from the surface to be sprayed by wiping with a clean, dry cloth.
- Cover surfaces under the area to be treated to avoid overspray.
- Shake can vigorously. Continue shaking for one minute and occasionally during use.
- For proper adhesion, apply only to dry surfaces.
- Hold can 8-10” from the surface.
- Apply with a sweeping motion using several thin coats.
- Allow each coat to dry thoroughly for several minutes before applying a new coat. If the product runs, the can is too close to the surface.
DANGERS & PRECAUTIONS
Read and understand the product’s label and Safety Data Sheet. Do NOT handle or use this product until all safety precautions have been read and understood. Flammable aerosol. It contains gas under pressure. May explode if heated. May cause respiratory irritation, drowsiness, or dizziness. It causes skin and serious eye irritation. Suspected of causing cancer. Keep away from heat, sparks, open flames, and hot surfaces. No Smoking. Do not spray on open flame or ignition.
