DRY ACID SCALE REMOVER
DRY ACID SCALE REMOVER is a non-volatile, activated dry powder acid. Inhibited to protect metal surfaces, including aluminum. In dry foam, Dry Acid gives off no corrosive fumes, and spills are swept up without damage to any surface. Dry Acid is safer than hydrochloric (muriatic) acid and nearly as strong. Removes one pound of scale for every two pounds of acid. PH indicator strips are also included. It contains corrosion inhibitors, wetting, and anti-foaming agents, and it is safer and easier to handle than liquid scale removers. Safe for use on metal surfaces.
Features and Benefits
- Non-Volatile, Activated Dry Powder Acid
- No Corrosive Fumes
- Safer than hydrochloric acid
- Easier to handle than liquid scale removers
- Safe for use on metal surfaces
Part Number; Size
- DSR-10 10 lb 4/cs
- DSR-50 50 lb pail
Directions:
- Drain and flush system.
- Remove all loose debris and stop bleed-off where applicable.
- Fill with fresh water and then add two pounds of Dry Acid for every 10 gallons of water in piping.
- Circulate the acid solution until all is removed.
- To determine when the acid solution is neutralized or when more acid should be added, use one of the pH indicator strips. Badly scaled systems may require more than one dose of acid. No more than two doses should be added to the same water.
If all scale is not removed after two dosages, drain and repeat the procedure. Flush out acid before refilling with fresh water. Adjust bleed-off.
Note: Do not drain cleaning solution on lawns or shrubs.
DANGERS & PRECAUTIONS:
Read and understand the product’s label and Safety Data Sheet. Causes severe skin burns and eye damage. May be corrosive to metals. Do not breathe mists. Wash hands thoroughly after handling. Do not get on clothes or skin. Wear face shield, eye protection, protective gloves, and protective clothing. Do NOT handle or use this product until all safety precautions have been read and understood. Keep out of the reach of children. Provide general, adequate ventilation.
