HP CLEANER
HP CLEANER is an evaporator coil cleaner that quickly dissolves built-up dirt, grease, nicotine, lint, and more. Meets USDA standards. Recommended for evaporator coils. When used on condenser coils and electronic air filters, rinsing is recommended. Dilute with 3 to 6 parts water, depending on the application. Also available in a super-concentrated quart that can ship without hazmat fees! VOC content is zero.
Features and Benefits
- Heavy Duty
- Non-Acid
- Penetrates Deep
- Dissolves Grease, Lint, Dirt, and Nicotine
Part Number; Size
- HPG-1Q 32 oz 8/cs
- HP-1 1 gal 4/cs
HP Cleaner Directions:
Wear gloves and eye protection.
- Turn the system off.
- Mix 1 part HP Cleaner with 3 to 6 parts water.
- Spray directly on the coil, make sure to thoroughly saturate the coil.
- Allow the solution to sit for 5 minutes.
- Resume normal operations.
Evaporator Coils: Apply to the air intake side of the coil. If possible, the fan should be operating. No rinsing needed.
Condenser Coils: Rinse thoroughly after applying.
Electronic Air Filters: Turn off unit and fan. Be sure to wet all areas of the plate. Rinsing is recommended. Keep from freezing.
DANGERS & PRECAUTIONS
Read and understand the product’s label and Safety Data Sheet. Do not breathe mists. Wash hands/gloves thoroughly after handling. Wear protective gloves, eye protection, and protective clothing. Provide adequate ventilation to keep the vapor concentration below TLV.
