FOAM-IT
FOAM-IT seals, fills, and insulates small cracks, gaps, and voids. Use on HVAC tubes, pipes, masonry, concrete, and other areas to prevent air penetration. Tack-free in 30 minutes. Painted over after four hours when it has fully set. UL classified and fire retardant.
Features and Benefits
- UL classified
- Fire retardant
- Hypoallergenic
- Sound absorbing
- Prevents heat/energy loss
- Extremely versatile
Part Number; Size
- FIA-12OZ 12 oz can 12/cs
Directions:
This product must be used in accordance with the following directions by HVACR professionals only.
- Shake can for 30 seconds before using.
- PRODUCT IS FLAMMABLE DURING DISPENSING. Before application, the surface should be free of oil, dust, and grease. Wear eye protection and rubber or plastic gloves during use. Apply between 60° and 100°
- To assemble, push, and rotate extension tube firmly onto the trigger, then screw trigger assembly onto the valve.
- HOLD CAN UPSIDE DOWN and activate the trigger while directing the tube into the area to be filled. NEVER ACTIVATE VALVE WITH CAN RIGHT SIDE UP. This allows propellent to escape prematurely.
- Fill cavity only 2/5 (40%) full; the foam will expand to fill the area. DO NOT APPLY INTO SPACES WITH INADEQUATE MOISTURE AND HUMIDITY (40% + Relative Humidity).
- TACK-FREE IN 30 MINUTES; DRIES IN 4 HOURS AT 70° AND 40-50% Relative Humidity.
- After FOAM-IT has completely dried (approx. 4 hours), it can easily be painted, sanded, plastered, grouted or caulked. To protect FOAM-IT against ultraviolet deterioration, always paint exposed foam when used on outside applications.
- To prevent the hardening of foam in valve stem and trigger, carefully unscrew trigger from can valve and clean both immediately with acetone or solvent remover. Replace cap and STORE IN UPRIGHT POSITION.
DANGERS & PRECAUTIONS:
Read and understand the product’s label and Safety Data Sheet before using this product. Extremely flammable aerosol. Harmful if inhaled and it causes skin irritation. Causes serious eye irritation. It may cause allergy, asthma symptoms, or breathing difficulties if inhaled. May cause an allergic skin reaction or respiratory irritation. May cause damage to organs through prolonged or repeated exposure. Keep away from heat sources such as sparks, open flames, and hot surfaces. No smoking. Pressurized container. Do not pierce or burn, even after use. Do not spray on an open flame or other ignition sources. Wear protective gloves and eye protection when using this product. Do not breathe in the mist from the spray.
