VAPCO Company

Innovating HVACR for more than 65 years

  • Home
  • News
  • Videos
    • Featured – Spray ‘N Lock
  • Catalog
  • Safety Data Sheets
  • About Vapco
  • Contact Us
  • Credit Application
  • Aerosols
    • Adhesive Aerosols
    • Coil Cleaning Aerosols
    • Industrial Aerosols
    • Lubricating Aerosols
    • Specialty Aerosols
  • Xpress Injects
    • Sealants
      • Express Seal 4OZ Aerosol
      • Xpress Seal
      • Seal And Protect
      • Kitchen Sink
    • Sealants With Dye
      • Xpress Seal With UV Dye
      • Tech In A Tube
      • Kitchen Sink With UV Dye
    • Performance
      • UV Dye
      • System Enhance
      • System Protect (Dry)
      • Overhaul
    • Accessories
      • Xpress Seal Direct Inject Gun
      • Xpress Aerosol Piercing Valve and Hose
      • Xpress Injector Hose
      • Threaded CO2 Refills
  • Coil Cleaners
    • Aerosol – Cylinders
    • Condensers
    • Evaporators
    • MicroChannel – Mini Split
    • Sprayers
  • Adhesives
    • PVC Spray ‘N Lock
    • Mean Green
    • Magna Tack
    • Golden Bear
      • Golden Bear Remover
    • Smooth Duct Sealant
    • 181 Duct Sealant
    • Universal Adhesive Remover
  • Ice Machine
    • Ice Machine Cleaner
    • Ice Machine Sanitizer
    • Nickel Guard
    • Nickel Guard Appliance
  • Glycol
    • Propylene Glycol
    • NSF Registered Propylene Glycol
    • Ethylene Glycol
    • Glycol Calculator
  • Line Set Flush
    • Purge Line Set Flush – 1 Pound
    • Purge Line Set Flush – Starter Kit
    • Purge Line Set Flush – 2 Pound
    • Purge Line Set Flush – 2LB, 2Pack
    • Purge Line Set Flush – 5 and 10LB Canister
    • Purge Line Set Flush – Cylinder Kit
    • Purge Line Set Flush – 16OZ Liquid
    • Purge Line Set Flush – 18 Inch Hose
    • Purge Line Set Flush – Actuator
    • Purge Line Set Flush – Spray Gun
  • Refrigerants
    • Professional R-290
    • Professional R-600a
    • Refrigerant Accessories
      • Can Tap
      • Can Tap and Hose
      • Can Tap, Hose and Gauge
      • Piercing Saddle Valve
  • Insulation
    • Foam-It
    • Premium Foam Tape
    • Cork Tape
    • Sealing Compound Cords
    • Sealing Compound Slugs
  • Specialty
    • Wasp-A-Way
    • No Sweat
    • Professional Service Kit
    • Glass Cleaner
    • Stainless Steel Cleaner & Polisher
    • Scale Remover
      • Scale Remover No. 1
      • Scale Remover No. 2
      • Dry Acid Scale Remover
    • Disinfectant/Deodorizers
    • Leak Detectors
    • Degreasers
    • Heat Dissipating Gel
    • Sprayers
    • Accessories
You are here: Home / News

EPA Registered Disinfectants and Company News

March 25, 2020 By sendthistorod@me.com

Vapco EPA Registered, Hospital Grade Disinfectants and Protective Gear
Vapco EPA Registered, Hospital Grade Disinfectants and Protective Gear

COMPANY UPDATE: Policies, EPA Registered Disinfectants, Cleaning Products, Protective Gear, and More!

Vapco is committed to staying open and continuing to manufacture our EPA registered disinfectants during these trying times to help support you in any way that we can. Even before the virus reached these levels we have been cleaning our equipment and high traffic areas very thoroughly and regularly. Due to Covid 19, we have also taken extra measures to ensure anyone who does have flu-like symptoms does not come to work. To ensure our employees and customers stay healthy, we have also implemented a split shift with our manufacturing and office crews to help minimize person to person contact. We will also continue to conduct as much business as possible electronically and digitally. Please reach out with any questions and we will do our best to respond in a timely manner.

As you know, Vapco offers several EPA registered disinfects and during these times we have seen an unprecedented surge in orders for these items.

We are fulfilling orders for our products as they come in and will continue to do so while inventory is available.

Despite the overwhelming amount of orders for our two hospital-grade disinfectant products, Disinfect Pro aerosol and fogger, at this time it does not appear that raw materials will be a concern, but it is a fluid situation and we will do our best to keep you informed as it continues to evolve. We are scheduled to receive another large shipment of our EPA registered disinfectants: Disinfect Pro, FCC-PRO, and Ice Machine Sanitizer, IMS-16oz at the beginning of April. Any delay in shipping will be taken care of shortly.

For cleaning rooms and surfaces, the Centers for Disease Control and Prevention says “disinfection, diluted household bleach solutions, alcohol solutions with at least 70% alcohol, and most common EPA registered disinfectants should be effective.”
Please stay safe and remember that the EPA and CDC say one of the best ways to combat this is by washing your hands with soap and water regularly and practice social distancing.

EPA APPROVED DISINFECTANTS FOR USE AGAINST SARS-CoV-2

  • DISINFECT PRO
https://www.vapcocompany.com/wp-content/uploads/2020/04/Disinfect-Pro-Aerosol.m4v

Hospital Grade Disinfectant (Part# DIPA-1)

(16.5 OZ Spray)

Effective Virucide, Bactericide, Tuberculocide, and Fungicide on hard nonporous surfaces when used as a disinfectant. Designed for use in areas such as industrial, institutional, commercial, medical, and residential facilities, equipment, and vehicles. Examples being places such as hospitals; ambulances; nursing homes; medical and dental offices and clinics; veterinary offices and animal areas; schools; laboratories; hotels and motels; restaurants and cafeterias; food storage, processing, packaging, handling, and serving establishments and equipment; offices; stores; factories and manufacturing plants; and apartment buildings and homes.

EPA (COVID-19) Information: Coronavirus Disease 2019 (COVID-19) is caused by SARS-CoV-2. Disinfect Pro, EPA Reg. No. 44446-67-6381, kills similar viruses and therefore can be used against SARS-CoV-2 when used in accordance with the directions for use against Rhinovirus; Canine Hepatitis virus on hard, non-porous surfaces. Refer to the CDC website at https://www.cdc.gov/coronavirus/index.html for additional information.

  • FCC PRO 
https://www.vapcocompany.com/wp-content/uploads/2020/04/FCC-Pro.m4v

EVAPORATOR COIL CLEANER & DISINFECTANT (Part# FCC-PRO)

FCC Pro is an EPA registered foaming evaporator coil cleaner as well as a disinfectant. To be more specific it is a water-based aerosol germicidal cleaner that combines butyl, surfactants, and emulsifiers with a quaternary germicide to provide heavy-duty cleaning of many areas. Yes, it’s effective at cleaning and disinfecting evaporator coils … but it can do so much more (including combating coronavirus).

EPA (COVID-19) Information: Coronavirus Disease 2019 (COVID-19) is caused by SARS-CoV-2. FCC PRO Evaporator Coil Cleaner & Disinfectant, EPA Reg. No. 44446-23-6381, kills similar viruses and therefore can be used against SARS-CoV-2 when used in accordance with the directions for use against Canine Parvovirus on hard, non-porous surfaces. Refer to the CDC website at https://www.cdc.gov/coronavirus/index.html for additional information.


EPA REGISTERED ONE-STEP SANITIZER

  • ICE MACHINE SANITIZER 

EPA Registered One-Step Sanitizer (Part# IMS-16OZ)
It is effective as a one-step disinfectant, sanitizer, germicide, deodorant that kills 99.9% of bacteria. It is also Salmonellacidal, bactericidal, pseudomonacidal, staphylocidal, fungicidal, virucidal. Use it on hard, non-porous surfaces such as floors, walls, stainless steel, painted and plastic surfaces. It is for use in places such as hospitals, nursing homes, medical clinics, dental offices, colleges, office buildings, hotels and motels, airports, restaurants, bars, beverage dispensers, ice machines,  soft-serve ice cream machines, as well as federally inspected meat and poultry plants and more.
Professional Grade HVAC product. USE ONLY AS DIRECTED.


HVACR CLEANING AND PROTECTIVE GEAR

https://www.vapcocompany.com/wp-content/uploads/2020/03/Wipe-It-Wipe-It-Good-Hand-and-Surface-Wipes.m4v
  • Wipe It, Wipe It Good

Heavy Duty Two Sided Wipes (Part# WI-110)
While these aren’t disinfecting wipes, viruses and bacteria cling to the oils and grease on your hands. Which is why washing your hands helps to remove those contaminants. If you can’t wash your hands, cleaning them with our wipes can help remove viruses and bacteria.
Professional Grade HVAC product. USE ONLY AS DIRECTED.

  • SHOE COVERS

Regular and Waterproof Options (Part# SHU-WP)
Stronger than typical shoe covers, these HVACR contractor booties are made with durability in mind. Designed for contractors in the construction, plumbing, heating, air, and pest control industries, these booties are stronger than other shoe covers on the market. They are made of breathable, cloth-like material with nonskid soles. They are also made to fit up to a size 18 work boot.

  • CONTRACTOR COVERALLS

Extra Tough, Professional grade (Part# COV-L/COV-XL)
Durable and disposable contractor coveralls. Designed with a cool and breathable material. Made with elastic wrists and waists. Keeps the wearer comfortable and neat when worn.

Filed Under: News Tagged With: slideshow

Vapco’s Ethylene & Propylene Glycol

January 29, 2020 By sendthistorod@me.com

Vapco’s Ethylene & Propylene Glycol Offers the Best Freeze Protection

Ethylene Glycol

Tired of the freezing cold? So is your car! Ethylene Glycol is popularly used to prevent car engines from freezing during the cold, winter months. This heat transfer fluid provides freeze protection as low as -100º F. It contains inhibitors that prevent corrosion of brass, copper, and other natural metals commonly found in vehicles. Ethylene Glycol is the ideal antifreeze and coolant solution for automotive radiators. Use it in industrial heating and cooling systems.

Propylene Glycol

Vapco’s Arctic Protection is a Propylene Glycol based antifreeze that offers excellent burst and freeze protection against temperatures as low as -100º F. Arctic Protection is a safe choice as an antifreeze or heat transfer solution. It is non-toxic, noncorrosive, and generally recognized as food safe (GRAFS) by The FDA. It also contains lubricating properties that won’t leave deposits or residue on heat transfer surfaces. Common uses include closed systems where potable water exists, heat pumps, and solar heating systems. 

Glycol Color Combos

Ethylene Glycol vs Propylene Glycol

Do you know the difference between Ethylene Glycol and Propylene Glycol? We’ve broken down the two to help you make the best choice for placing your glycol order.

Ethylene Glycol is most commonly used as an antifreeze in commercial and industrial applications. It transfers heat better than propylene glycol, and can function at temperatures as low as -100º F. Ethylene Glycol is an excellent choice for protecting natural metals. 

Propylene Glycol’s primary function is to absorb water.  Its common use is for heat transfer for things such as hydronic, heat pump, and solar heating systems. It has a higher viscosity, with lubricating qualities that extend the component file. Above all, it has a lower toxicity than ethylene glycol. Apply it as an additive in cosmetics and pharmaceutical products. 

Customize Your Glycol Order

Vapco offers customized glycol orders. Choose your mix, color, and size at no extra charge.* Glycol is available in orders of 5 gallons to 5,000 gallons. Use our Glycol Calculator to find the amount you need. Read more about Vapco’s Ethylene Glycol and Arctic Protection here.

*with 48-hour notice

Filed Under: Uncategorized Tagged With: slideshow

PVC Spray ‘N Lock passes ASTM potable water lab tests; increases pressure limits to 215psi!

March 28, 2019 By sendthistorod@me.com

St. Louis Testing Laboratories Incorporated, an independent chemical, mechanical, and environmental testing service, recently examined and tested PVC Spray ‘N Lock to determine its impact on the potability of pipe water … and we’re very excited (and exceedingly proud) to say that it passed with flying colors!

Scientific testing  (ASTM D3452-06(2017) and analysis proved that PVC Spray ‘N Lock does not negatively impact the potability of water run through a system. Plus, the lab also pressure tested PVC Spray ‘N Lock’s strength; it held up to a whopping 215 psi!

The lab followed strict testing protocols as set forth by the American Society For Testing Materials (ASTM). They purchased a length of  3/4″ potable water PVC pipe and elbow fittings, cut two lengths of pipe and bonded them to the elbows using PVC Spray ‘N Lock. The pipe was rinsed with tap water for one minute. The rinse water was collected. They then rinsed the pipe for another 15 minutes and again collected a sample of the rinse.

According to the report, the two rinses were analyzed using Pyrolysis/Gas-Chromatography (Pyrolysis is the thermal decomposition of materials). The rinses were individually dropped directly into a micro-furnace capable of 1050°C. The analysis of both did not detect the presence of Spray-‘N-Lock’s ingredients.

The lab’s official determination is that PVC Spray ‘N Lock did not negatively impact the potability of water purged through the system.

To see the full lab report, click below.

Filed Under: News Tagged With: PVC Spray 'N Lock

Full Xpress Inject Line of Products

January 16, 2019 By sendthistorod@me.com

NEW POWER COMBINATIONS

Seal & Protect
Overhaul
Tech In A Tube
Kitchen Sink
Kitchen Sink with UV Dye
Seal & Protect

Seal & Protect was formulated specifically for a permanent seal, that eliminates and prevents acid while removing moisture. It is available for systems up to 125 tons. It is compatible with all refrigerants, excluding ammonia.

  • Fastest Acting Leak Seal
  • Formulated for Permanent Seal
  • Eliminates Acid
  • Removes Moisture
  • Prevents Acid

Available for Systems:

  • Up to 1.5 Ton | XPS-1.5T-SP
  • 1.5-5 Ton | XPS-5T-SP
  • 6-15 Ton | XPS-15T-SP
  • 16-30 Ton | XPS-30T-SP
  • 31-60 Ton | XPS-60T-SP
  • 61-125 Ton | XPS-125T-SP
Overhaul

Overhaul removes moisture while eliminating and preventing acid. It also reduces noise and increases unit efficiency. It is available for systems up to 125 tons. It is compatible with all refrigerants, excluding ammonia.

  • Eliminates Acid
  • Removes Moisture
  • Prevents Acid
  • Reduces Noise
  • Increases Efficiency

Available for Systems:

  • 1.5-5 Ton | XPS-5T-OH
  • 6-15 Ton | XPS-15T-OH
  • 16-30 Ton | XPS-30T-OH
  • 31-60 Ton | XPS-60T-OH
  • 61-125 Ton | XPS-125T-OH
  • 1.5-5 Ton | XPS-5XL
Tech In A Tube

Tech In a Tube offers the fastest acting leak sealant on the market, a UV Dye to locate leaks and also removes moisture while eliminating and preventing acid. It is available for systems up to 125 tons. It is compatible with all refrigerants, excluding ammonia.

  • Fastest Acting Leak Seal
  • UV Dye to Locate Leaks
  • Brightest UV DYE Available!
  • Formulated for Permanent Seal
  • Eliminates Acid
  • Removes Moisture
  • Prevents Acid

Available for Systems:

  • 1.5-5 Ton | XPS-5T-TNT
  • 6-15 Ton | XPS-15T-TNT
  • 16-30 Ton | XPS-30T-TNT
  • 31-60 Ton | XPS-60T-TNT
  • 61-125 Ton | XPS-125T-TNT
Kitchen Sink

Kitchen Sink is one of our most powerful combinations and offers all of the advantages of Seal & Protect and Overhaul in one product. It provides the fastest acting leak sealant on the market, is formulated for a permanent seal, eliminates and prevents acid, removes moisture, reduces noise and increases efficiency.  It is available for systems up to 60 tons. It is compatible with all refrigerants, excluding ammonia.

  • Fastest Acting Leak Seal
  • Permanent Seal
  • Eliminates Acid
  • Removes Moisture
  • Prevents Acid
  • Reduces Noise
  • Increases Efficiency

Available for Systems:

  • 1.5-5 Ton | XPS-5T-KS
  • 6-15 Ton | XPS-15T-KS
  • 16-30 Ton | XPS-30T-KS
  • 31-60 Ton | XPS-60T-KS
Kitchen Sink with UV Dye

Kitchen Sink with UV Dye is our most powerful and versatile all-in-one product ever. It provides a UV dye for locating leaks, the fastest acting leak sealant on the market, is formulated for a permanent seal, eliminates and prevents acid, removes moisture, reduces noise and increases efficiency. It is available for systems up to 60 tons. It is compatible with all refrigerants excluding ammonia.

  • Fastest Acting Leak Seal
  • UV Dye to Locate Leaks
  • Brightest UV DYE Available
  • Permanent Seal
  • ElIminates Acid
  • Removes Moisture
  • Prevents Acid
  • Reduces Noise
  • Increases Efficiency

Available for Systems:

  • 1.5-5 Ton | XPS-5T-KSD
  • 6-15 Ton | XPS-15T-KSD
  • 16-30 Ton | XPS-30T-KSD
  • 31-60 Ton | XPS-60T-KSD

Additional Xpress Injects

UV DYE
Seal
Seal & UV Dye
Sytem Enhance
System Protect
UV DYE

Xpress Injects UV Dyes are so bright, leaks can often be seen with nothing more than the naked eye … and now with the convenience and ease of use with the direct inject CO2 injector gun.  The dye is the same color that auto makers use in automobile A/C systems.  The use of a black light and UV glasses can be used to find those really small leaks.

  • UV Dye to Locate Leaks
  • Brightest UV Dye on the Market 

Available for Systems:

  • Up to 5 Ton, XPS-5T-DYE
  • 126-250 Ton, XPS-250T-DYE
Seal

The Xpress Inject Seal formula is the only proven refrigeration sealer on the market with 17 years and millions of leaks permanently sealed. Other sealants that are just now entering the market have no proven track record. Do you want to take that chance?

Xpress Seal is the fastest refrigerant sealant on the market. Unlike other products, Xpress Seal travels with the refrigerant gas while other products travel with the oil. This allows the sealant to find and permanently seal the leaks faster. And if there ever comes a time that the system needs to be opened up, after it is evacuated, there won’t be sealant hardening in the lines and valves. Xpress Seal’s ultra-concentrated formula will permanently seal small holes located in A/C condensers, evaporators, fittings, and metal line sets. Perfect for split system, heat pumps, microchannel coils, packaged units, and mini splits. Xpress Seal is compatible with all refrigerants except ammonia.

Xpress Seal is an epoxy that reacts to water and air when coming in contact with the atmosphere where it is leaking. If the system stays charged for one day when running, Xpress Seal will fix most leaks. If a system has not leaked below 15 psi, there is typically not air or moisture in the system. If there is air and water in the system, pull a deep vacuum on the system and boil moisture out of the system. An alternative to pulling a vacuum is to use Vapco’s direct inject Xpress Seal Dry and turn the moisture into synthetic oil. This will prevent Xpress Seal from reacting inside your system.

From a safety stand point, Xpress Seal doesn’t contain chemicals that can cause permanent blindness. Also, the direct inject tubes are designed with safety in mind. There are check valves inside the tubes to prevent accidental release if hooked up incorrectly or over pressured.

  • Fastest Acting Leak Seal on the Market
  • Formulated for Permanent Seal

Available for Systems:

  • Up to 1.5 Ton | XPS-SS
  • 1.5-5 Ton | XPS-5T
  • 6-15 Ton | XPS-15T
  • 16-30 Ton | XPS-30T
  • 31-60 Ton | XPS-60T
  • 61-125 Ton | XPS-125T
  • 126-250 Ton | XPS-250T

Large Leak Version

  • 1.5-5 Ton | XPS-5XL

It is compatible with all refrigerants (except ammonia).

Seal & UV Dye

We have taken the best sealant on the market, Xpress Seal, and added our UV dye to it.  Now you have the best of both worlds in one direct inject product.  Our UV dye is so bright, leaks can often be seen with nothing more than the naked eye.  Great for finding larger leaks.  In many cases, no UV light needed or special glasses.  Our Sealant is the fastest sealant and the longest history of any other sealant.  Now going on 18 years and millions of leaks still sealed. Xpress Seal with UV Dye is compatible with all oils and refrigerants except ammonia.

  • UV Dye to Locate Leaks
  • Brightest UV Dye Available
  • Fastest Acting Leak Seal
  • Formulated for Permanent Seal

Available for Systems:

  • Up to 1.5 Ton | XPS-SSD
  • 1.5-5 Ton | XPS-5T-SD
  • 6-15 Ton | XPS-15T-SD
  • 16-30 Ton | XPS-30T-SD
  • 31-60 Ton | XPS-60T-SD
  • 61-125 Ton | XPS-125T-SD
  • 126-250 Ton | XPS-250T-SD

Large Leak Version

  • 1.5-5 Ton | XPS-5TXL-SD

 

Sytem Enhance

System Enhance’s unique formula enhances the performance of A/C and refrigeration systems and is now available in Vapco’s easy to use direct injector tube.  This concentrated formula, when injected into old or new systems can provide significant energy savings, extend the life of the unit, and can even quit noisy systems.

Enhance reduces mechanical friction up to an amazing 1,500% which equates to energy savings.  This system boosting formula contains a highly polar molecule that works synergistically with the compressor oil to improve performance by increasing the heat transfer in the condenser and evaporator coils.  The polarized molecule bonds to the metal inside the system thus removing the insulating layer of refrigeration oil and forming a conductive layer to improve heat transfer.  Just another energy saving benefit.  Enhance last for the life of the equipment or until the oil is changed and in that case, A/C Enhance will need to be added to the system again.

Perfect for split system, heat pumps, microchannel coils, packaged units, and mini splits.  One Xpress Seal UV Dye injector tube can be used for units up to 5 ton.  For large commercial systems, multiple injector tubes should be used.

Enhance is fully compatible with all refrigeration oils, mineral, PAG, and ester oils and all refrigerants. (Excluding ammonia)

  • Return Oil to the Compressor
  • Reduces Noise
  • Increases Efficiency

Available for Systems:

  • Up to 5 Ton | XPS-5T-ACE
  • 126-250 Ton | XPS-250T-ACE
System Protect

Xpress Inject Protect is used whenever there is a concern that there is moisture in the system and now it is easier to add than ever with the first ever direct inject CO2 gun and Xpress Seal Dry injector tube.  No more need for time consuming hook ups.  Xpress Seal Dry is far less expensive at removing moisture than through traditional mechanical methods.

Protect’s concentrated formula contains agents that convert moisture in the A/C system into a compatible synthetic oil that mixes with the existing oil in the system.  When used, Xpress Seal Dry can prevent acid build up and compressor corrosion that could lead to system failure.  Xpress Seal Dry can also be used prior to injecting Xpress Seal into the system to insure all of the moister has been removed.  Moisture in a system also robs it of cooling capacity.

Perfect for split system, heat pumps, microchannel coils, packaged units, and mini splits.  One Xpress Seal Dry injector tube can be used for units up to 5 ton.

Protect is fully compatible with mineral, PAG, and ester oils.  (Excluding ammonia)

  • Eliminates Acid
  • Removes Moisture
  • Prevents Acid

Available for Systems:

  • Up to 5 Ton | XPS-5T-P
  • 126-250 Ton | XPS-250T-P

 

Filed Under: News

Larger Xpress Injects Make HVACR History

January 9, 2019 By sendthistorod@me.com

We’re very proud to announce the launch of five new, history-making, largest-in-the-world Xpress Inject products: Seal & Protect, Overhaul, Tech-in-a-Tube, Kitchen Sink and Kitchen Sink with UV Dye along with several others. These new products make it possible for the HVACR contractor to easily find and seal leaks, as well as clean, protect and enhance a variety of air conditioner and refrigeration systems all the way up to 250 tons … with just one injection!

 

Biggest Sizes, Most Effective Direct Inject Combinations in the World.

Biggest Sizes, Most Effective Direct Inject Combinations in the World.
Vapco Products is proud to offer the largest sizes (good for AC units up to 250 tons) and most effective combinations (five new, never-before-seen products) in a direct inject.

Unheard of Sizes and Bolder Combinations Change Air Conditioning and Refrigeration Maintenance Forever!

“This is the game changer everyone has been waiting for,” said Scott Garner, Vapco Products president. 

Often HVACR contractors are faced with having to use multiple injects to get a job done. If they need to clean an AC or refrigeration system for example, that’s one injection. If they need to find a leak and seal it, that’s another. If they need to remove moisture it’s another. If they need to protect or enhance the system, it’s yet another set. Worse yet, should the contractor need to work on larger units (30 tons plus), then an even bigger collection of products would be needed. That’s not only expensive and time consuming but having so many products at your feet often gets confusing.

“We wanted to change all that,” said Garner. “Our goal was to offer a single group of products that could do everything as easily and economically as possible. Our mantra was from the beginning: one product for one job … and I’m happy to say we hit that mark. For each maintenance job we created the perfect product combination and reservoir size. ” 

Worlds largest, most advanced Xpress Injects!
Over the past few years the HVACR industry has been demanding a new, more straight-forward approach to maintaining, servicing and repairing Air Conditioning and Refrigeration systems. The standard multiple products, multiple direct injection route fails most contractors. A new solution was needed and Vapco, with its new line of larger Xpress Injects has come to the rescue.

Seal & Protect was formulated specifically for a permanent seal, that eliminates and prevents acid while removing moisture. It is available for systems up to 125 tons.

Overhaul also removes moisture while eliminating and preventing acid. It also reduces noise and increases unit efficiency. It is available for systems up to 125 tons.

Tech In a Tube offers the fastest acting leak sealant on the market, a UV Dye to locate leaks and also removes moisture while eliminating and preventing acid. It is available for systems up to 125 tons. 

Kitchen Sink is a powerful combination and offers all of the advantages of Seal & Protect and Overhaul in one product.It is available for systems up to 60 tons.

Kitchen Sink with UV Dye is our most powerful all-in-one product and offers all the advantages of Seal & Protect, Overhaul and Tech In a Tube. It is available for systems up to 60 tons. 

Vapco Xpress Injects
Contractors will have no problem using the new injects. The application method is identical to other Vapco direct injects.

“It has been a long time coming,” admitted Garner. “But what we have now is going to change the way AC and refrigeration lines are maintained all around the world. It’s simply an easier and more economical way of doing it.”

Also available, in even much larger 250 ton sizes, are some of their most popular Xpress inject products including Xpress Seal, Seal and UV Dye, A/C Enhancer, UV Dye, Xpress Protect. 

“These new products will make the contractors life easier by giving them just one product to use for their larger systems and more complicated, more demanding maintenance jobs,” 

Scott Garner, Vapco Products president

Download Our Brochure

NEW POWER COMBINATIONS

Seal & Protect
Overhaul
Tech In A Tube
Kitchen Sink
Kitchen Sink with UV Dye
Seal & Protect

Seal & Protect was formulated specifically for a permanent seal, that eliminates and prevents acid while removing moisture. It is available for systems up to 125 tons. It is compatible with all refrigerants, excluding ammonia.

  • Fastest Acting Leak Seal
  • Formulated for Permanent Seal
  • Eliminates Acid
  • Removes Moisture
  • Prevents Acid

Available for Systems:

  • Up to 1.5 Ton | XPS-1.5T-SP
  • 1.5-5 Ton | XPS-5T-SP
  • 6-15 Ton | XPS-15T-SP
  • 16-30 Ton | XPS-30T-SP
  • 31-60 Ton | XPS-60T-SP
  • 61-125 Ton | XPS-125T-SP
Overhaul

Overhaul removes moisture while eliminating and preventing acid. It also reduces noise and increases unit efficiency. It is available for systems up to 125 tons. It is compatible with all refrigerants, excluding ammonia.

  • Eliminates Acid
  • Removes Moisture
  • Prevents Acid
  • Reduces Noise
  • Increases Efficiency

Available for Systems:

  • 1.5-5 Ton | XPS-5T-OH
  • 6-15 Ton | XPS-15T-OH
  • 16-30 Ton | XPS-30T-OH
  • 31-60 Ton | XPS-60T-OH
  • 61-125 Ton | XPS-125T-OH
  • 1.5-5 Ton | XPS-5XL
Tech In A Tube

Tech In a Tube offers the fastest acting leak sealant on the market, a UV Dye to locate leaks and also removes moisture while eliminating and preventing acid. It is available for systems up to 125 tons. It is compatible with all refrigerants, excluding ammonia.

  • Fastest Acting Leak Seal
  • UV Dye to Locate Leaks
  • Brightest UV DYE Available!
  • Formulated for Permanent Seal
  • Eliminates Acid
  • Removes Moisture
  • Prevents Acid

Available for Systems:

  • 1.5-5 Ton | XPS-5T-TNT
  • 6-15 Ton | XPS-15T-TNT
  • 16-30 Ton | XPS-30T-TNT
  • 31-60 Ton | XPS-60T-TNT
  • 61-125 Ton | XPS-125T-TNT
Kitchen Sink

Kitchen Sink is one of our most powerful combinations and offers all of the advantages of Seal & Protect and Overhaul in one product. It provides the fastest acting leak sealant on the market, is formulated for a permanent seal, eliminates and prevents acid, removes moisture, reduces noise and increases efficiency.  It is available for systems up to 60 tons. It is compatible with all refrigerants, excluding ammonia.

  • Fastest Acting Leak Seal
  • Permanent Seal
  • Eliminates Acid
  • Removes Moisture
  • Prevents Acid
  • Reduces Noise
  • Increases Efficiency

Available for Systems:

  • 1.5-5 Ton | XPS-5T-KS
  • 6-15 Ton | XPS-15T-KS
  • 16-30 Ton | XPS-30T-KS
  • 31-60 Ton | XPS-60T-KS
Kitchen Sink with UV Dye

Kitchen Sink with UV Dye is our most powerful and versatile all-in-one product ever. It provides a UV dye for locating leaks, the fastest acting leak sealant on the market, is formulated for a permanent seal, eliminates and prevents acid, removes moisture, reduces noise and increases efficiency. It is available for systems up to 60 tons. It is compatible with all refrigerants excluding ammonia.

  • Fastest Acting Leak Seal
  • UV Dye to Locate Leaks
  • Brightest UV DYE Available
  • Permanent Seal
  • ElIminates Acid
  • Removes Moisture
  • Prevents Acid
  • Reduces Noise
  • Increases Efficiency

Available for Systems:

  • 1.5-5 Ton | XPS-5T-KSD
  • 6-15 Ton | XPS-15T-KSD
  • 16-30 Ton | XPS-30T-KSD
  • 31-60 Ton | XPS-60T-KSD

Additional Xpress Injects

UV DYE
Seal
Seal & UV Dye
Sytem Enhance
System Protect
UV DYE

Xpress Injects UV Dyes are so bright, leaks can often be seen with nothing more than the naked eye … and now with the convenience and ease of use with the direct inject CO2 injector gun.  The dye is the same color that auto makers use in automobile A/C systems.  The use of a black light and UV glasses can be used to find those really small leaks.

  • UV Dye to Locate Leaks
  • Brightest UV Dye on the Market 

Available for Systems:

  • Up to 5 Ton, XPS-5T-DYE
  • 126-250 Ton, XPS-250T-DYE
Seal

The Xpress Inject Seal formula is the only proven refrigeration sealer on the market with 17 years and millions of leaks permanently sealed. Other sealants that are just now entering the market have no proven track record. Do you want to take that chance?

Xpress Seal is the fastest refrigerant sealant on the market. Unlike other products, Xpress Seal travels with the refrigerant gas while other products travel with the oil. This allows the sealant to find and permanently seal the leaks faster. And if there ever comes a time that the system needs to be opened up, after it is evacuated, there won’t be sealant hardening in the lines and valves. Xpress Seal’s ultra-concentrated formula will permanently seal small holes located in A/C condensers, evaporators, fittings, and metal line sets. Perfect for split system, heat pumps, microchannel coils, packaged units, and mini splits. Xpress Seal is compatible with all refrigerants except ammonia.

Xpress Seal is an epoxy that reacts to water and air when coming in contact with the atmosphere where it is leaking. If the system stays charged for one day when running, Xpress Seal will fix most leaks. If a system has not leaked below 15 psi, there is typically not air or moisture in the system. If there is air and water in the system, pull a deep vacuum on the system and boil moisture out of the system. An alternative to pulling a vacuum is to use Vapco’s direct inject Xpress Seal Dry and turn the moisture into synthetic oil. This will prevent Xpress Seal from reacting inside your system.

From a safety stand point, Xpress Seal doesn’t contain chemicals that can cause permanent blindness. Also, the direct inject tubes are designed with safety in mind. There are check valves inside the tubes to prevent accidental release if hooked up incorrectly or over pressured.

  • Fastest Acting Leak Seal on the Market
  • Formulated for Permanent Seal

Available for Systems:

  • Up to 1.5 Ton | XPS-SS
  • 1.5-5 Ton | XPS-5T
  • 6-15 Ton | XPS-15T
  • 16-30 Ton | XPS-30T
  • 31-60 Ton | XPS-60T
  • 61-125 Ton | XPS-125T
  • 126-250 Ton | XPS-250T

Large Leak Version

  • 1.5-5 Ton | XPS-5XL

It is compatible with all refrigerants (except ammonia).

Seal & UV Dye

We have taken the best sealant on the market, Xpress Seal, and added our UV dye to it.  Now you have the best of both worlds in one direct inject product.  Our UV dye is so bright, leaks can often be seen with nothing more than the naked eye.  Great for finding larger leaks.  In many cases, no UV light needed or special glasses.  Our Sealant is the fastest sealant and the longest history of any other sealant.  Now going on 18 years and millions of leaks still sealed. Xpress Seal with UV Dye is compatible with all oils and refrigerants except ammonia.

  • UV Dye to Locate Leaks
  • Brightest UV Dye Available
  • Fastest Acting Leak Seal
  • Formulated for Permanent Seal

Available for Systems:

  • Up to 1.5 Ton | XPS-SSD
  • 1.5-5 Ton | XPS-5T-SD
  • 6-15 Ton | XPS-15T-SD
  • 16-30 Ton | XPS-30T-SD
  • 31-60 Ton | XPS-60T-SD
  • 61-125 Ton | XPS-125T-SD
  • 126-250 Ton | XPS-250T-SD

Large Leak Version

  • 1.5-5 Ton | XPS-5TXL-SD

 

Sytem Enhance

System Enhance’s unique formula enhances the performance of A/C and refrigeration systems and is now available in Vapco’s easy to use direct injector tube.  This concentrated formula, when injected into old or new systems can provide significant energy savings, extend the life of the unit, and can even quit noisy systems.

Enhance reduces mechanical friction up to an amazing 1,500% which equates to energy savings.  This system boosting formula contains a highly polar molecule that works synergistically with the compressor oil to improve performance by increasing the heat transfer in the condenser and evaporator coils.  The polarized molecule bonds to the metal inside the system thus removing the insulating layer of refrigeration oil and forming a conductive layer to improve heat transfer.  Just another energy saving benefit.  Enhance last for the life of the equipment or until the oil is changed and in that case, A/C Enhance will need to be added to the system again.

Perfect for split system, heat pumps, microchannel coils, packaged units, and mini splits.  One Xpress Seal UV Dye injector tube can be used for units up to 5 ton.  For large commercial systems, multiple injector tubes should be used.

Enhance is fully compatible with all refrigeration oils, mineral, PAG, and ester oils and all refrigerants. (Excluding ammonia)

  • Return Oil to the Compressor
  • Reduces Noise
  • Increases Efficiency

Available for Systems:

  • Up to 5 Ton | XPS-5T-ACE
  • 126-250 Ton | XPS-250T-ACE
System Protect

Xpress Inject Protect is used whenever there is a concern that there is moisture in the system and now it is easier to add than ever with the first ever direct inject CO2 gun and Xpress Seal Dry injector tube.  No more need for time consuming hook ups.  Xpress Seal Dry is far less expensive at removing moisture than through traditional mechanical methods.

Protect’s concentrated formula contains agents that convert moisture in the A/C system into a compatible synthetic oil that mixes with the existing oil in the system.  When used, Xpress Seal Dry can prevent acid build up and compressor corrosion that could lead to system failure.  Xpress Seal Dry can also be used prior to injecting Xpress Seal into the system to insure all of the moister has been removed.  Moisture in a system also robs it of cooling capacity.

Perfect for split system, heat pumps, microchannel coils, packaged units, and mini splits.  One Xpress Seal Dry injector tube can be used for units up to 5 ton.

Protect is fully compatible with mineral, PAG, and ester oils.  (Excluding ammonia)

  • Eliminates Acid
  • Removes Moisture
  • Prevents Acid

Available for Systems:

  • Up to 5 Ton | XPS-5T-P
  • 126-250 Ton | XPS-250T-P

 

Filed Under: Uncategorized Tagged With: slideshow

  • 1
  • 2
  • Next Page »

PVC SPRAY ‘N LOCK DEMO

https://youtu.be/PblyugB8ess

Most Popular Product Search

PVC Spray 'N Lock

Evolutionary PVC Fusion Product - Not a Cement or Glue, No Daubers or Primers Required

  • Certified not to negatively impact the potability of water, ASTM D3452-06(2017).
  • Will Not Freeze, Spill or Harden in Can.
  • Pressure Tested to 215PSI
  • Heat Tested to 140°F
  • Independent Laboratory Test  (Potability and Pressure Test)


PVC SPRAY 'N LOCK replaces the traditional multiple-product, multiple-step process of cleaning, priming and cementing pipes with an easy-to-use, single application, chemical bonding spray. Visit Product Page!


 

See Videos

Product categories

Making the Contractor's and Wholesaler's Life Easier and His Reputation Shine

Vapco is proud to be at the forefront of HVACR innovation and services for both contractor and wholesaler. We pledge to remain focused on the relevant; to constantly innovate new approaches and creative products that allow you to succeed and flourish in your trade. With continual additions of new products and options, we strongly reaffirm that commitment.


 

https://youtu.be/r2P3TFo2-Dg

Whats new At Vapco

Innovating the future of HVACR

We are very excited about our new set of ground-breaking HVACR products, including the revolutionary PVC Spray 'n lock, larger direct injects, new Purge canister options and more. Here's a video peak!

Vapco Newsletter

Stay Connected! Get the latest news, insights and information from your favorite HVACR manufacturer.

We take your privacy seriously. We will never sell or give your information away. You can opt-out of this service at any time.

Since 1953, Vapco Products has created and distributed cutting-edge and naturally "green" products to the air conditioning and heating industries.  Founded and still centrally-located in the St. Louis, Missouri, area, Vapco distributes products retailers and wholesalers worldwide.

Privacy Notice

This privacy notice discloses the privacy practices for www.vapcoproducts.com. This privacy notice applies solely to information collected by this … Read more

Website Disclaimer

This website is operated by Vapco Products, hereinafter indicated by “us” or “we”. Access to and the use of this website (“Website”) is subject to … Read more

Our Promise

We are the contractor’s manufacture. We pledge to remain focused on the relevant, to constantly innovate new approaches and creative products that allow you to succeed and flourish in your trade.

Contact Us

If you have any questions about Vapco or any of the company's products, please contact us at:

Vapco Products Inc.

401 Marshall Road, Valley Park, Mo 63088. Call Toll Free: 844-229-9906 Local: 636-923-2121

Fax: 636-923-3002

EMAIL: info@VapcoProducts.com

Copyright © 2025 Vapco Products Inc.