POWER CLEAN
POWER CLEAN is a heavy-duty detergent concentrate for dissolving things such as grease, dirt, wax, pipe dope, lint and most other contaminates. The product is an excellent, mildly alkaline cleaner for use on a variety of things such as evaporator coils, condenser coils, electronic air filters, motors, and fan blades. Works excellent on cleaning cooking grease. It also meets UDSA standards and is 100% biodegradable. It contains no solvents and is safe to use on all metals.
Features and Benefits
- 100% Biodegradable
- Meets USDA standards
- Versatile and safe
- Superior cleaning on cooking grease
Part Number; Size
- PC-1 1 gal 4/cs
Directions:
Cleaning Evaporator Coils: For heavy dirt and oils, dilute 1 part product with 3 to 4 parts water. For light dirt and dust, dilute 1 product with 10 parts water. For extremely dirty units, Power Clean can be used as a strong 1 to 1. Apply with a low or high-pressure sprayer, then rinse when there is not sufficient condensate being pulled from the air.
Cleaning Condenser Coils & Air Filters: Turn the system off. For heavy dirt and oils, dilute 1part product with 3 to 4 parts water. For light dirt and dust, dilute 1 part Power Clean with up to 10 parts water. Apply with a low-pressure sprayer and allow contact for at least 15 minutes, then rinse thoroughly. For extremely dirty units, Power Clean can be used as a strong 1 to 1.
General Purpose Cleaning: Dilute 1 part to 15 parts water. Exceptional results on any washable surface when applied from a spray bottle. Just spray on and wipe off. No rinsing required.
DANGERS & PRECAUTIONS:
Read and understand the product’s label and Safety Data Sheet before using this product. Provide sufficient mechanical ventilation. Wear chemical-resistant gloves and chemical splash goggles. Do not take internally. Avoid contact with eyes. It can cause severe eye burns, gastrointestinal irritation, and skin irritation. Please refer to the SDS for complete Toxicological Information. Do not mix with any products. Avoid contact with strong oxidizing materials. Do NOT handle or use this product until all safety precautions have been read and understood. Provide adequate ventilation to keep the vapor concentration below TLV. Use safety glasses and chemical resistant gloves when handling this product. Wash hands and clothing that came in contact with product after use.
DO NOT use it in any manner for which it was not designed. Always wear chemical-resistant gloves and safety glasses when applying the product.
