VAPCO Company

Innovating HVACR for more than 65 years

  • Home
  • News
  • Videos
    • Featured – Spray ‘N Lock
  • Catalog
  • Safety Data Sheets
  • About Vapco
  • Contact Us
  • Credit Application
  • Aerosols
    • Adhesive Aerosols
    • Coil Cleaning Aerosols
    • Industrial Aerosols
    • Lubricating Aerosols
    • Specialty Aerosols
  • Xpress Injects
    • Sealants
      • Express Seal 4OZ Aerosol
      • Xpress Seal
      • Seal And Protect
      • Kitchen Sink
    • Sealants With Dye
      • Xpress Seal With UV Dye
      • Tech In A Tube
      • Kitchen Sink With UV Dye
    • Performance
      • UV Dye
      • System Enhance
      • System Protect (Dry)
      • Overhaul
    • Accessories
      • Xpress Seal Direct Inject Gun
      • Xpress Aerosol Piercing Valve and Hose
      • Xpress Injector Hose
      • Threaded CO2 Refills
  • Coil Cleaners
    • Aerosol – Cylinders
    • Condensers
    • Evaporators
    • MicroChannel – Mini Split
    • Sprayers
  • Adhesives
    • PVC Spray ‘N Lock
    • Mean Green
    • Magna Tack
    • Golden Bear
      • Golden Bear Remover
    • Smooth Duct Sealant
    • 181 Duct Sealant
    • Universal Adhesive Remover
  • Ice Machine
    • Ice Machine Cleaner
    • Ice Machine Sanitizer
    • Nickel Guard
    • Nickel Guard Appliance
  • Glycol
    • Propylene Glycol
    • NSF Registered Propylene Glycol
    • Ethylene Glycol
    • Glycol Calculator
  • Line Set Flush
    • Purge Line Set Flush – 1 Pound
    • Purge Line Set Flush – Starter Kit
    • Purge Line Set Flush – 2 Pound
    • Purge Line Set Flush – 2LB, 2Pack
    • Purge Line Set Flush – 5 and 10LB Canister
    • Purge Line Set Flush – Cylinder Kit
    • Purge Line Set Flush – 16OZ Liquid
    • Purge Line Set Flush – 18 Inch Hose
    • Purge Line Set Flush – Actuator
    • Purge Line Set Flush – Spray Gun
  • Refrigerants
    • Professional R-290
    • Professional R-600a
    • Refrigerant Accessories
      • Can Tap
      • Can Tap and Hose
      • Can Tap, Hose and Gauge
      • Piercing Saddle Valve
  • Insulation
    • Foam-It
    • Premium Foam Tape
    • Cork Tape
    • Sealing Compound Cords
    • Sealing Compound Slugs
  • Specialty
    • Wasp-A-Way
    • No Sweat
    • Professional Service Kit
    • Glass Cleaner
    • Stainless Steel Cleaner & Polisher
    • Scale Remover
      • Scale Remover No. 1
      • Scale Remover No. 2
      • Dry Acid Scale Remover
    • Disinfectant/Deodorizers
    • Leak Detectors
    • Degreasers
    • Heat Dissipating Gel
    • Sprayers
    • Accessories
You are here: Home / Adhesives / Universal Adhesive Remover
Universal Adhesive Remover

Universal Adhesive Remover

UNIVERSAL ADHESIVE REMOVER – keeps adhesive spraying systems clean and safe from buildup. The unique blend of solvents removes adhesive from most surfaces. Includes metal, rubber, glass, fabrics, and some plastics.

Categories: Adhesives, Specialty Tags: golden bear, large spray gun, Mean Green, Pressurized cylinder, THA, Universal Adhesive Remover
  • Description
  • SDS
  • TDR

UNIVERSAL ADHESIVE REMOVER

UNIVERSAL ADHESIVE REMOVER keeps adhesive spraying systems clean and safe from buildup. The unique blend of solvents removes adhesive from most surfaces. Includes metal, rubber, glass, fabrics, and some plastics. Universal Adhesive Remover removes insulation and bubble wrap. 

 

Features and Benefits

  • Non-Flammable
  • Adhesive Remover
  • Cleans Adhesive Spraying System

 

Part Number;               Size

  • UAR-SC                            15 lb

 

DIRECTIONS:

Maintenance, Spray Gun and Hose: Flush hose and gun between each new cylinder of adhesive with Universal Adhesive Remover. A fresh start with a new adhesive cylinder increases the life of the hose and spray gun. Shut off cylinder valve on used adhesive cylinder. Bleed the pressure from the hose and spray the gun into a disposable container. Remove the hose from the adhesive cylinder and attach it to the cylinder. Open valve. Spray gun into a disposable container for 20 to 30 seconds until clean. Shut off cylinder valve and bleed pressure from the hose by spraying the gun. Remove the hose from the cylinder and put it on a new adhesive cylinder. Open adhesive valve and spray.

Clogged Hose and Spray Gun: Shut off cylinder valve on used adhesive cylinder. Bleed the pressure from the hose. Spray gun into a disposable container. Remove the hose from the adhesive cylinder and put back on the adhesive cylinder. Open adhesive valve and spray.

Clean Up Excess Adhesive: Spray directly onto adhesive with a hose and spray gun. Remove and wipe with a clean cloth. For more control, spray directly on to the cloth and then wipe off the adhesive. Wear rubber gloves and safety goggles. 

 

DANGERS & PRECAUTIONS

Read and understand the product’s label and Safety Data Sheet. It contains gas under pressure; May explode if heated. It causes skin and serious eye irritation. May cause drowsiness or dizziness. May cause cancer. Suspected of causing genetic defects. Keep out of reach of children. Protect from sunlight. Store in a well-ventilated place. Wash hands thoroughly after handling. Wear protective gloves, eye protection, and protective clothing. Avoid breathing fumes, mist, vapors, and spray. Use only outdoors or in a well-ventilated area. 

 

Contact Us

News and Updates

Subscribe on Youtube

Follow Us on Facebook 


 

SDS

TDR

Related products

  • Low Temp Bubbles

    Low Temp Bubbles

    Read more
  • DisenfectPro

    Disinfect Pro

    Read more
  • Spray Degreaser Cylinder

    Spray Degreaser Cylinder

    Read more
  • Drain Clog Buster blows out condensate drain lines

    Drain Clog Buster

    Read more

PVC SPRAY ‘N LOCK DEMO

https://youtu.be/PblyugB8ess

Most Popular Product Search

PVC Spray 'N Lock

Evolutionary PVC Fusion Product - Not a Cement or Glue, No Daubers or Primers Required

  • Certified not to negatively impact the potability of water, ASTM D3452-06(2017).
  • Will Not Freeze, Spill or Harden in Can.
  • Pressure Tested to 215PSI
  • Heat Tested to 140°F
  • Independent Laboratory Test  (Potability and Pressure Test)


PVC SPRAY 'N LOCK replaces the traditional multiple-product, multiple-step process of cleaning, priming and cementing pipes with an easy-to-use, single application, chemical bonding spray. Visit Product Page!


 

See Videos

Product categories

Making the Contractor's and Wholesaler's Life Easier and His Reputation Shine

Vapco is proud to be at the forefront of HVACR innovation and services for both contractor and wholesaler. We pledge to remain focused on the relevant; to constantly innovate new approaches and creative products that allow you to succeed and flourish in your trade. With continual additions of new products and options, we strongly reaffirm that commitment.


 

https://youtu.be/r2P3TFo2-Dg

Whats new At Vapco

Innovating the future of HVACR

We are very excited about our new set of ground-breaking HVACR products, including the revolutionary PVC Spray 'n lock, larger direct injects, new Purge canister options and more. Here's a video peak!

Vapco Newsletter

Stay Connected! Get the latest news, insights and information from your favorite HVACR manufacturer.

We take your privacy seriously. We will never sell or give your information away. You can opt-out of this service at any time.

Since 1953, Vapco Products has created and distributed cutting-edge and naturally "green" products to the air conditioning and heating industries.  Founded and still centrally-located in the St. Louis, Missouri, area, Vapco distributes products retailers and wholesalers worldwide.

Privacy Notice

This privacy notice discloses the privacy practices for www.vapcoproducts.com. This privacy notice applies solely to information collected by this … Read more

Website Disclaimer

This website is operated by Vapco Products, hereinafter indicated by “us” or “we”. Access to and the use of this website (“Website”) is subject to … Read more

Our Promise

We are the contractor’s manufacture. We pledge to remain focused on the relevant, to constantly innovate new approaches and creative products that allow you to succeed and flourish in your trade.

Contact Us

If you have any questions about Vapco or any of the company's products, please contact us at:

Vapco Products Inc.

401 Marshall Road, Valley Park, Mo 63088. Call Toll Free: 844-229-9906 Local: 636-923-2121

Fax: 636-923-3002

EMAIL: info@VapcoProducts.com

Copyright © 2025 Vapco Products Inc.