VAPCO Company

Innovating HVACR for more than 65 years

  • Home
  • News
  • Videos
    • Featured – Spray ‘N Lock
  • Catalog
  • Safety Data Sheets
  • About Vapco
  • Contact Us
  • Credit Application
  • Aerosols
    • Adhesive Aerosols
    • Coil Cleaning Aerosols
    • Industrial Aerosols
    • Lubricating Aerosols
    • Specialty Aerosols
  • Xpress Injects
    • Sealants
      • Express Seal 4OZ Aerosol
      • Xpress Seal
      • Seal And Protect
      • Kitchen Sink
    • Sealants With Dye
      • Xpress Seal With UV Dye
      • Tech In A Tube
      • Kitchen Sink With UV Dye
    • Performance
      • UV Dye
      • System Enhance
      • System Protect (Dry)
      • Overhaul
    • Accessories
      • Xpress Seal Direct Inject Gun
      • Xpress Aerosol Piercing Valve and Hose
      • Xpress Injector Hose
      • Threaded CO2 Refills
  • Coil Cleaners
    • Aerosol – Cylinders
    • Condensers
    • Evaporators
    • MicroChannel – Mini Split
    • Sprayers
  • Adhesives
    • PVC Spray ‘N Lock
    • Mean Green
    • Magna Tack
    • Golden Bear
      • Golden Bear Remover
    • Smooth Duct Sealant
    • 181 Duct Sealant
    • Universal Adhesive Remover
  • Ice Machine
    • Ice Machine Cleaner
    • Ice Machine Sanitizer
    • Nickel Guard
    • Nickel Guard Appliance
  • Glycol
    • Propylene Glycol
    • NSF Registered Propylene Glycol
    • Ethylene Glycol
    • Glycol Calculator
  • Line Set Flush
    • Purge Line Set Flush – 1 Pound
    • Purge Line Set Flush – Starter Kit
    • Purge Line Set Flush – 2 Pound
    • Purge Line Set Flush – 2LB, 2Pack
    • Purge Line Set Flush – 5 and 10LB Canister
    • Purge Line Set Flush – Cylinder Kit
    • Purge Line Set Flush – 16OZ Liquid
    • Purge Line Set Flush – 18 Inch Hose
    • Purge Line Set Flush – Actuator
    • Purge Line Set Flush – Spray Gun
  • Refrigerants
    • Professional R-290
    • Professional R-600a
    • Refrigerant Accessories
      • Can Tap
      • Can Tap and Hose
      • Can Tap, Hose and Gauge
      • Piercing Saddle Valve
  • Insulation
    • Foam-It
    • Premium Foam Tape
    • Cork Tape
    • Sealing Compound Cords
    • Sealing Compound Slugs
  • Specialty
    • Wasp-A-Way
    • No Sweat
    • Professional Service Kit
    • Glass Cleaner
    • Stainless Steel Cleaner & Polisher
    • Scale Remover
      • Scale Remover No. 1
      • Scale Remover No. 2
      • Dry Acid Scale Remover
    • Disinfectant/Deodorizers
    • Leak Detectors
    • Degreasers
    • Heat Dissipating Gel
    • Sprayers
    • Accessories
You are here: Home / Aerosols / Disinfect Pro
DisenfectPro

Disinfect Pro

DISINFECT PRO is an EPA registered hospital-grade disinfectant, deodorizer, and antimicrobial agent designed specifically to eradicate a wide variety of bacteria, viruses, and other microorganisms. It deodorizes these areas to help eliminate dirty sock syndrome. Disinfect Pro is designed to sanitize and disinfect any hard, non-porous surface and leaves a light and pleasant citrus scent behind.

EPA APPROVED DISINFECTANT FOR USE AGAINST SARS-CoV-2

EPA (COID-19) Information: Coronavirus Disease 2019 (COVID-19) is caused by SARS-CoV-2. Disinfect Pro, EPA Reg. No. 44446-67-6381, kills similar viruses and therefore can be used against SARS-CoV-2 when used in accordance with the directions for use against Rhinovirus; Canine Hepatitis virus on hard, non-porous surfaces. Refer to the CDC website at https://www.cdc.gov/coronavirus/index.html for additional information.

EPA APPROVED DISINFECTANT FOR USE AGAINST MONKEYPOX

Monkeypox is caused by monkeypox virus. DISINFECT PRO Disinfectant Deodorant kills similar viruses and therefore can be used against monkeypox virus when used in accordance with the directions for use against Adenovirus Type 5 or Infectious Canine Hepatitis Virus on hard, nonporous surfaces. Refer to the CDC website athttps://www.cdc.gov/poxvirus/monkeypox/index.html for additional information.

 

 

 

 

Categories: Aerosols, Disinfect, Specialty, Specialty Aerosols Tags: Deodorize, Disinfect Pro, disinfectant
  • Description
  • SDS
  • TDR
  • Whitepaper

DISINFECT PRO

DISINFECT PRO is an EPA registered hospital-grade disinfectant, deodorizer, and antimicrobial agent designed specifically to eradicate a wide variety of bacteria, viruses, and other microorganisms. For HVAC applications, it is ideal for controlling mold and mildew that grow on and around evaporator coils and in ductwork. It also deodorizes these areas to help eliminate dirty sock syndrome. Designed to sanitize and disinfect any hard, non-porous surface and leave a light and pleasant citrus scent behind, you can rely on Disinfect Pro to get the job done.

Applications

Disinfect Pro can be used in many settings such as hospitals, nursing homes, and other community living centers, schools, daycares, libraries, laboratories, hotels, motels, cafeterias, restaurants, offices, veterinary facilities, gymnasiums, locker rooms and so much more. It has many applications in a variety of industries and environments such as commercial, industrial, institutional, medical, residential facilities, and on equipment and vehicles.

Features and Benefits

  • Viricidal against HIV-1 (AIDS Virus), Herpes Simplex 1 & 2, Avian Influenza A virus (H5N1), and the H1N1 Influenza A virus.
  • Bactericidal against Escherichia coli, Pseudomonas aeruginosa, Salmonella enterica, Methicillin-resistant Staphylococcus aureus (MRSA), and more.
  • Tuberculocidal against mycobacterium tuberculosis bovis BCG (tubercle bacilli)
  • Fungicidal against trichophyton mentagrophytes (athlete’s foot)

USDA approved for use in Federally Inspected meat and poultry plants

Monkeypox is caused by monkeypox virus. Vapco Product’s DISINFECT PRO kills similar viruses and therefore can be used against monkeypox virus when used in accordance with the directions for use against Canine Parvovirus on hard, non‐porous surfaces. Refer to the CDC website at https://www.cdc.gov/poxvirus/monkeypox/index.html for additional information.

EPA (COVID-19) Information: Coronavirus Disease 2019 (COVID-19) is caused by SARS-CoV-2. FCC PRO Evaporator Coil Cleaner & Disinfectant, EPA Reg. No. 44446-23-6381, kills similar viruses and therefore can be used against SARS-CoV-2 when used in accordance with the directions for use against Canine Parvovirus on hard, non-porous surfaces. Refer to the CDC website at https://www.cdc.gov/coronavirus/index.html for additional information.

 

 

Part Number;       Size

  • DIPA-1                            16.5 oz 12/cs

 

Instructions for Use

*Not for use on Humans or Animals*

GENERAL: Shake can well before each use and hold upright while spraying. Make sure that all large filth is cleaned prior to use. Do not use where food or related products are prepared, processed, or stored. Always be sure that all food and food-related products are removed from the area that is being treated. DO NOT use on waxed or polished surfaces, water-based latex paint, shellac, cellulose, or other alcohol-sensitive surfaces.

TO CLEAN AND DEODORIZE:  Hold the container upright about 6 to 8 inches away from the surface. Then spray all surfaces and allow to air dry.

TO DISINFECT: Pre-clean surfaces of large contaminants before use. Hold container upright about 6 to 8 inches away from the surface. Then spray liberally to wet the surface. The treated surface must remain wet for at least 10 minutes. Allow to air dry. All surfaces that come in to contact with food such as counters, appliances, tables, door handles, etc. should be rinsed with water after the product has dried.

TO DISINFECT TOILETS AND URINALS: Remove gross filth prior to disinfection. Empty toilet bowl or urinal. Hold container upright about 6-8″ from surface. Spray to thoroughly wet hard, nonporous surfaces. Brush over exposed surfaces and under the rim. Allow to stand for 10 minutes, then flush

VETERINARIAN OFFICES, ANIMAL AREAS, AND ANIMAL LABORATORIES:

Remove all animals and feed on the premises, vehicles, cages, kennels, etc. Make sure to remove all litter, droppings, and manure from floors, walls, and surfaces of facilities occupied or traversed by animals. Empty all feeding and water appliances, then thoroughly clean all surfaces with soap or detergent and rinse with water. Hold container upright about 6-8″ from the surface. Spray to thoroughly wet hard, nonporous surfaces. Treated surfaces must remain wet for 10 minutes. Allow to air dry. Immerse all halters, collars, leashes, and other types of equipment used in handling and restraining animals as well as forks, shovels, and scrapers used for removing litter and manure. Ventilate buildings, vehicles, and other closed spaces. Do not house animals or employ equipment until treatment has been absorbed, set, or dried. Thoroughly scrub feeding and watering equipment with soap or detergent, and rinse with potable water before reuse.

* Read the label on the can or usage guide for complete instructions. It is a violation of federal law to use this product in a manner inconsistent with its labeling.

 

DANGERS & PRECAUTIONS

 Do NOT handle or use this product until all safety precautions have been read and understood. Protect from sunlight and store in a well-ventilated place. Keep away from heat, sparks, open flames, and hot surfaces. NO smoking while using this product. Do not spray on an open flame or other ignition sources. Wash hands thoroughly after handling. Wear eye protection. 

 

Contact Us

News and Updates

Subscribe on Youtube

Follow Us on Facebook 

 


 

SDS

TDR

Whitepaper

Related products

  • Disinfect Pro Liquid

    Disinfect Pro Liquid

    Read more
  • Universal Adhesive Remover

    Universal Adhesive Remover

    Read more
  • Bird Dog Low Temp

    Bird Dog Low Temp

    Read more
  • Drain Clog Buster blows out condensate drain lines

    Drain Clog Buster

    Read more

PVC SPRAY ‘N LOCK DEMO

https://youtu.be/PblyugB8ess

Most Popular Product Search

PVC Spray 'N Lock

Evolutionary PVC Fusion Product - Not a Cement or Glue, No Daubers or Primers Required

  • Certified not to negatively impact the potability of water, ASTM D3452-06(2017).
  • Will Not Freeze, Spill or Harden in Can.
  • Pressure Tested to 215PSI
  • Heat Tested to 140°F
  • Independent Laboratory Test  (Potability and Pressure Test)


PVC SPRAY 'N LOCK replaces the traditional multiple-product, multiple-step process of cleaning, priming and cementing pipes with an easy-to-use, single application, chemical bonding spray. Visit Product Page!


 

See Videos

Product categories

Making the Contractor's and Wholesaler's Life Easier and His Reputation Shine

Vapco is proud to be at the forefront of HVACR innovation and services for both contractor and wholesaler. We pledge to remain focused on the relevant; to constantly innovate new approaches and creative products that allow you to succeed and flourish in your trade. With continual additions of new products and options, we strongly reaffirm that commitment.


 

https://youtu.be/r2P3TFo2-Dg

Whats new At Vapco

Innovating the future of HVACR

We are very excited about our new set of ground-breaking HVACR products, including the revolutionary PVC Spray 'n lock, larger direct injects, new Purge canister options and more. Here's a video peak!

Vapco Newsletter

Stay Connected! Get the latest news, insights and information from your favorite HVACR manufacturer.

We take your privacy seriously. We will never sell or give your information away. You can opt-out of this service at any time.

Since 1953, Vapco Products has created and distributed cutting-edge and naturally "green" products to the air conditioning and heating industries.  Founded and still centrally-located in the St. Louis, Missouri, area, Vapco distributes products retailers and wholesalers worldwide.

Privacy Notice

This privacy notice discloses the privacy practices for www.vapcoproducts.com. This privacy notice applies solely to information collected by this … Read more

Website Disclaimer

This website is operated by Vapco Products, hereinafter indicated by “us” or “we”. Access to and the use of this website (“Website”) is subject to … Read more

Our Promise

We are the contractor’s manufacture. We pledge to remain focused on the relevant, to constantly innovate new approaches and creative products that allow you to succeed and flourish in your trade.

Contact Us

If you have any questions about Vapco or any of the company's products, please contact us at:

Vapco Products Inc.

401 Marshall Road, Valley Park, Mo 63088. Call Toll Free: 844-229-9906 Local: 636-923-2121

Fax: 636-923-3002

EMAIL: info@VapcoProducts.com

Copyright © 2025 Vapco Products Inc.